Windmill Software Ltd
Data Acquisition Intelligence

 Engineering Software
March 2011

Windmill 7 Technical Support

Home
Newsletters
DAQ Catalogue
Search

ComDebug Settings for an Adam PGW Balance

Read this in conjunction with the Getting started with ComDebug and COMIML Serial Driver page.

For information on what each of the settings means, see the Serial Driver Settings Overview

Adam PGW Balance

Serial Interface Parameters are set via the balance's Serial menu. These settings assume data is output on a single line or sent continuously.

COM Port Settings

Comm Port: Select the port to which your instrument is connected.
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 2
Flow Control: None

Data Format

Prompt Command: !KP<CR>
Example data string: +1.234567<CR>
Data format: ASCII
Example parsing: Ignore Until +-
Extract Until <CR>

Instrument Timing

Read: In the Background
Timeout: 5000 ms
Instrument Idle Time: 500 ms
Data Persistence Time: 5000 ms

Further Information:
Adam Equipment PGW Series
Windmill Serial Port Driver Settings
Getting Started with ComDebug and COMIML
COM Port Settings

Request Technical Support


Make and model of instrument:


Using which Software:
ComDebug  Other  
 
Problem:
Please give as many details as possible. for example:
what steps you have taken so far, can you get a reply from
your instrument...

Name:        
Organisation:
Email:

Home | Windmill Measurement Software | Data Acquisition Shop | Monitor Newsletter | Contact Us | Contents: Tutorials, Tech Support, Applications, Free Stuff, etc | Search

Copyright Windmill Software Ltd 2000
PO Box 58, North District Office, Manchester, M8 8QR, UK.
E-mail, Tel: +44 161 833 2782
Webmaster
Data Acquisition News Feed (RSS) Free measurement news feed...